Weak at 80 ºc. Requires adhesives to attach to bed. Things to consider when printing the extruder must at least reach 220 ºc, the ideal temperature being 205 ºc. However, it will depend on each brand. It is necessary to use a heated bed between 60 and 70 ºc. The use of lacquer is recommended for a correct fixation. It is recommended to print with the fan off for the first layers and the rest at 100%. Make sure that the room temperature is adequate, pronounced cold can negatively affect printing. Asa - acrylonitrile styrene acrylate asa 3d printing filament is a thermoplastic amorphous polymer and is part of the so-called "technical materials".
This filament comes to replace abs and therefore has more good points than bad. So much so that the automotive industry has been using it E Commerce Photo Editing in their products for a while as it does not yellow like other 3d printing filaments. Inesem business school 3d design and printing course (university degree with 5 ects credits) more information advantage excellent mechanical properties. Resistant to the impact of sunlight. Waterproof. It does not present warping and a good finish is obtained without producing deformations. Matte finish. Chemical resistance. Drawbacks it is not an easy filament to print, it requires technique. Very high printing temperature, so energy consumption is higher.
Releases harmful and toxic styrene gas in printing. Things to consider when printing melting temperature between 250 and 260 ºc. A very good leveling of the bed and the distance from the hotend nozzle to it is necessary. It requires a heated bed between 80 and 100 ºc to avoid cracking . Disable the layer fan or use it at 20 or 30%. Carbon fiber we finish with the rigid 3d printing filaments with the carbon fiber filament , one of the best known materials, especially in the world of competition.